Race Series Oil Pump with Plate - Oil Cooled Motors - '17-'24 M8

Increase oil pressure, oil volume, engine oil flow and return oil scavenging Quieter and smoother engine operation Engine temperatures run 15°-25° cooler Oil temperatures run 15°-30° cooler 10-30 lbs more psi of oil pressure Reduces wet sumping, blow by and oily air cleaners Test results show 2 horsepower gain and 2 ft/lbs of torque gain to the rear wheel on M-Eight Includes a billet 7075 hard anodized oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature (Race Series® M-Eight oil pumps have deeper scavenge kidneys when compared to the HP+ kidneys for increased scavenge volume) Includes FEULING® High Flow billet camplate made from 7075 aluminum; which is 50% harder and stronger than the factory or FEULING® OE+ camplates Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages, including matching the oil portholes throughout the camplate to the portholes in the engine case, which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings Oil pumps are bench-tested; the relief valve is seated and sealed to a minimum of 30 psi with full pop-off at 55-60 psi Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function FEULING® oil pump and camplate combination eliminates common pressure and scavenge issues associated with the factory oiling systems FEULING® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal Made in the USA